 |
|
|
IC M802 |
| IC-M802
Specifications |
| This information is taken directly
off of the Icom IC-M802 brochure.
|
| General |
- Frequency coverage (Unit : MHz):
- Rx 0.5–29.9999
(continuous)
- Tx
- 1.6– 2.9999, 4.0–
4.9999, 6.0– 6.9999
- 8.0– 8.9999,
12.0–13.9999, 16.0–17.9999
- 18.0–19.9999,
22.0–22.9999, 25.0–27.5000
- Type of emission :
- J3E (SSB), J2B (AFSK), F1B
- (FSK), A1A (CW), H3E (AM*)
- (*Rx only)
- Number of channels : 1355 (max.)
- (160 user programmable; 249
ITU SSB duplex; 72 ITU SSB simplex; 662 ITU FSK duplex;
160 e-mail; 21 ITU 4MHz simplex; 31 ITU 8MHz simplex)
- Antenna impedance : 50Ω
(SO-239)
- Power supply requirement : 13.6V
DC ±15%
- Max. current drain (at 13.6V
DC):
- Tx (Max. power) 30A (typ.)
- Rx (Max. audio) 3.0A
- Operating temp. range :
- –30°C to +60°C; –22°F
to +140°F
- Guaranteed range : –20°C
to +55°C; –4°F to +131°F
- Frequency stability : ±10Hz (at
–20°C to +55°C)
- Dimensions (W×H×D; projections
not included):
- Main unit 240×94×238.4mm;
9-7⁄16×3-11⁄16×9-3⁄8 in
- Controller 220×110×84.4mm;
8-21⁄32×4-11⁄32×3-5⁄16 in
- Speaker 110×110×84.4mm;
4-11⁄32×4-11⁄32×3-5⁄16 in
- Weight :
- Main unit 4.7kg; 10.36lb
- Controller 570g; 1.26lb
- Speaker 370g; 0.81lb
|
| Transmitter |
- Output power : 150, 60, 20W PEP
(Selectable)
- Spurious emissions : –62dB
- Unwanted sideband : 55dB
- Carrier suppression : 40dB
- Microphone impedance :
600Ω
|
| Receiver |
- Sensitivity (at 10dB S/N) :
-
| |
J3E, A1A |
J2B, F1B |
H3E |
DSC (J2B) |
| 0.5 – 1.5999MHz |
6.3µV |
– |
32µV |
0.5µV
(at 1% error rate) |
| 1.6 – 1.7999MHz |
0.89µV |
0.89µV |
6.3µV |
| 1.8 – 3.9999MHz |
0.5µV |
0.5µV |
3.2µV |
| 4.0 –29.9999MHz |
– |
- Spurious response rejection
ratio:
- (1.6–29.9999MHz) More than
70dB
- Audio output power (at 13.6V DC)
: 4.0W typical at 10% distortion with a 4Ω load
- Audio output impedance:
4–8Ω
- Clarity variable range : ±150Hz
- GPS interface : NMEA 0183
version 2.0 or later
|
| Supplied
Accessories |
- Separation cable, OPC-1106 (5m;
16.4ft)
- Hand microphone, HM-135
- External speaker, SP-24
- Mounting bracket kits
- Microphone hanger
- DC power cables
- ACC plugs
- Spare fuses
|
| Options |
- AT-140 HF AUTOMATIC
ANTENNA TUNER: Matches the transceiver to a long wire antenna
with little insertion loss. Cable connections are easy to
install. AT-130 is also available.
- MN-100 ANTENNA MATCHER:
Match the transceiver to a dipole antenna. Covers all HF bands
from 1.5 to 30MHz. Two 8m antenna wires come attached.
- MN-100L ANTENNA MATCHER:
Match the transceiver to a longwire antenna. Covers all HF
bands from 1.5 to 30MHz. A 15m antenna wire comes attached.
- PS-60 DC POWER SUPPLY:
Provides 13.6V DC (30A) output from an AC outlet.
- PS-66 DC-DC CONVERTER:
Provides 13.6V DC (30A) output from 19–32V DC.
- MB-75 FLUSH MOUNT KIT:
For mounting the controller or speaker to a panel.
- SP-24 EXTERNAL SPEAKER: 4×4-inch
external speaker. Same as supplied. Input impedance: 4Ω.
Max. input power: 7W.
- AH-710 FOLDED DIPOLE
ANTENNA: Covers 1.9 to 30MHz band. Has an SO-239 connector and
30m coaxial cable. Easy to assemble.
- RC-25 REMOTE CONTROLLER:
Remote controller head. Same as supplied.
- HM-135 HAND MICROPHONE:
Remote function mic. Same as supplied.
- OPC-1106 SEPARATION
CABLE: 5m (16.4ft) separation cable between controller and
main unit. Same as supplied.
- OPC-1147 SHIELD CONTROL
CABLE: 10m (32.8ft) shield cable to control AT-140.
|
|
|